Skip to main content eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJjb25zdW1lcktleSI6IjFlNzFkM2QwYmU4YzQ4YWJiOWU0OWMwYjhmOTcwYzFhIiwidXNlcklkIjoiY29uY2VudHJlayIsImlzc3VlZEF0IjoiMjAxNy0xMS0xN1QxNToxNTo1MC0wNTowMCIsInR0bCI6NjA0ODAwLCJ1c2VyIjoiY29uY2VudHJlayJ9.qeMt5FTU5GXB0SHjAMq3FLNGkJ7MmdjOYcrFlgRepr8
Share

Spicer Driveshafts for Improved Strength in Your Jeep.

Jeep JK Driveshaft Flange
Direct-fit bolt-in flange

Dana is providing Jeep® owners with an upgrade for their Wrangler® JK with this new high-performance Spicer driveshaft.

  • Engineered with a smaller diameter
    • Able to clear the vehicle’s exhaust  
  • Includes direct-fit bolt-in flange, this driveshaft
  • Provides ease of installation and a better off-road experience 
  • Optimized for 0"- 2" and 2"- 4" lifts on the Jeep JK
  • Delivers strength that can exceed even original equipment
  • Features tubes that are 50% thicker than original equipment components

Jeep enthusiasts everywhere trust genuine Spicer parts for unparalleled performance in even the toughest conditions. The new genuine Spicer driveshaft, built specifically for the Jeep Wrangler JK, gives drivers an added edge when going off-road.

Jeep JK Driveshaft

These Spicer driveshafts are optimized for 0"- 2" and 2"- 4" lifts on the Jeep Wrangler JK. 

Find out why the Spicer name has been trusted for generations, and why our innovations will continue to inspire off-roaders to push the boundaries for years to come.

A Direct-Fit, Bolt-In Replacement for the Jeep Wrangler JK.

This driveshaft features a smaller diameter, which will not interfere with the Jeep Wrangler JK exhaust. In addition, you will enjoy the following advantages:

  • One-piece flange
    • Prevents run-out
    • Eliminates need for an adapter
    • Bolts to the stock Jeep axle
  • Optimized for 0" - 2" and a 2" - 4" lift
    • Ideal for larger tires
    • Offers improved ground clearance
  • Thicker tube than original equipment part
    • 50% thicker than OE shaft
    • Delivers added strength
  • Longer slip yoke for increased travel
    • More extension and compression through the tube shaft
Jeep JK Driveshaft Detail
Longer slip yoke for increased travel


Locate Driveshafts for the Jeep Wrangler JK.

Get the lift you’re looking for in your Jeep Wrangler JK—get in touch with the Spicer parts dealer in your area. And be sure to check out the full range of Dana-backed products designed to unleash the performance in your vehicle. 

Jeep, Spicer, and Dana — Legendary Brands Built Stronger Together.  Read Our Story

 

Spicer® 1350 Driveshaft for Ultimate Dana 60TM Equipped Jeep® Wrangler® JK 

Built from high-quality steel to deliver the ruggedness and durability you’re already getting in your Ultimate Dana 60TM axles, 1350 Series driveshafts are engineered for applications that require high horsepower and torque. 

Two Jeep Driveshafts
  • 100% bolt-in solution
    • Includes all required mounting hardware
  • Extra thick tubing
    • 2 inch outer diameter / .120 inch thick wall tube
  • Long-slip design
    • Features 6 inches of travel
  • Slip assembly located at the T-case
    • Minimizes impact damage and contamination Jeep Driveshaft