Spicer Driveshafts for Improved Strength in Your Jeep® JK
Dana provides off-roaders with an upgrade for their Jeep Wrangler JK, with these high-performance 1310 and 1350 Series Spicer® driveshafts. Find out why the Spicer name has been trusted for generations, and why our innovations will continue to inspire Jeep owners to push the boundaries for years to come.
- Engineered with a smaller diameter for improved clearance to the exhaust
- Include a direct-fit bolt-in flange
- Provide ease of installation and a better off-road experience
- Deliver strength that can exceed even original equipment
- Tubes are thicker for added strength
Note: To ensure the proper fitment, it is best to measure your application after any axle and lift installation.
These Spicer driveshafts are optimized for 2" - 4" lifts
Spicer® 1310 Series Front Driveshaft for the Jeep Wrangler JK (Direct Fit Bolt-In Replacement)
This driveshaft features a smaller diameter, which will not interfere with the Jeep JK exhaust. In addition, you will enjoy the following advantages:
- One-piece flange
- Prevents run-out
- Eliminates need for an adapter
- Bolts to the stock Jeep axle
- Optimized for a 2" - 4" lift
- Ideal for larger tires
- Offers improved ground clearance
- Thicker tube than original equipment part
- 50% thicker than OE shaft
- Delivers added strength
Spicer 1310 Performance Front Driveshaft for the Jeep Wrangler JK (Direct Fit Bolt-In Replacement)
| Application | Position | Part # | Length - Collapsed/Extended (Inches) |
|---|---|---|---|
| Jeep JK (2" - 4") | Front | 10020345 | 35.9 / 40.5 |
Spicer® 1350 Driveshaft for the Jeep Wrangler JK
Built from high-quality steel to deliver the ruggedness and durability you’re already getting in the axles in your Jeep JK, 1350 Series driveshafts are engineered for applications that require high horsepower and torque.
- Maintenance free SPL® 1350 Series double cardan
- Lubed-for-life high performance SPL 1350 series u-joint
- Non-greaseable lubed-for-life double cardan centering package
- Improved lube retention and resistance to contaminants
- No loss of operating angle potential
- High strength tubing
- Smaller diameter 2×0.120 DOM front shafts allow for improved clearance
- 3×0.083 DOM rear shafts ensure no critical speed issues
- Slip member
- Front shafts feature strong 1.375" spline with a re-lube zerk in the seal
- Rear shafts feature 1.5" spline with a re-lube zerk in the slip yoke
- Lubed-for-life high performance SPL 1350 series u-joint at end of each slip yoke
Spicer 1350 Heavy Duty Driveshafts for Jeep Wrangler JK with Ultimate Dana 60™ Axles
| Application | Position | Part # | Length - Collapsed/Extended (Inches) |
|---|---|---|---|
| Jeep Wrangler JK (UD60JK) | Front | 10113216 | 31.8 / 34.9 |
| Jeep Wrangler JK (UD60JK) | Rear | 10113217 | 39.9 / 43.6 |
Locate Driveshafts for the Jeep
Get the lift you’re looking for in your Jeep JK: get in touch with the Spicer parts dealer in your area. And be sure to check out the full range of Dana-backed products designed to unleash the performance in your vehicle at DanaAftermarket.com.
Jeep, Spicer, and Dana — legendary brands built stronger together. Read Our Story
